Features for composite line post insulator
11kV 10kN composite line post insulator is very similar to composite pin insulator, the difference for the two types of insulator are as follows:
1. The top fitting is different. For 11kV 10kN composite line post insulator the diameter of groove is bigger than composite pin insulator
2. The fibre glass reinforced core is different. Maybe the requirement of strength for composite line post insulator is higher than composite pin insulator, so sometimes the diameter of core is different.
3. The length of insulator pin maybe different. Wooden cross arm and steel cross arm required the different length of the composite insulator pin.
11kV 10kN composite line post insulator 11kV 10kN composite line post insulator
The main technical data of 11kV 10kN composite line post insulator
1. System voltage: 11kV
2. Nominal specific creepage distance: 25mm/kV
3. Failing load: 10kN
4. Power frequency wet withstand voltage: 28kV
5. Lightning impulse withstand voltage: 95kV
6. Material of insulating part: high temperature vulcanized silicone rubber
7. Material of metal part: hot dip galvanized steel
8. Applicable standards: IEC61109, BS137
This type composite insulator of 11kV 10kN composite line post insulator is our design for Africa market and the price is competitive. The design is reasonable and economic. All the technical data can meet the requirement of customer.
©2014 Zhengzhou Orient Power Co., Ltd All rights reserved. Tel/Fax: +86 371 86097078
sales@composite-insulator.com Orient is a composite insulator manufacturer for products of composite insulator and polymer insulator