Cross-arm insulator products are suitable for rebuilding urban power net. Composite cross-arm insulator has been widely applied in the transmission and distribution lines.
Composite cross-arm insulator is also called silicone rubber cross-arm insulator or polymer cross-arm insulator. Composite cross-arm insulator cannot be replaced by porcelain insulator because composite cross-arm insulator can effectively prevent flash accidents, decrease the time of clear and maintenance and be used especially in the small railway tunnel and with small volume.
Orient Power provides composite cross-arm insulator ranging from 10kV to 110kV. It comes with merits like outstanding leakproofness and terrific resistance to acid, alkalinity, aging and high temperature as well. Therefore, composite cross-arm insulator is absolutely insulated and free from moist.
composite cross-arm insulator composite insulator cross-arm type
It should be noted that composite cross-arm insulator must be handled with care to avoid friction or collision with hard articles. Treading on the porcelain bushing of this cross-arm insulator is prohibited.
The type code of this composite cross-arm insulator is normally FS type, such as FS-10/1.1, FS-10/5, FS-35/5, FS-35/5-2, FS-35/5-3 and FS-110/5.
The above cross-arm insulator products are parts of our composite insulators. If you have any inquiry about composite insulator, especially cross-arm insulator, please do not hesitant to contact Orient Power.
©2014 Zhengzhou Orient Power Co., Ltd All rights reserved. Tel/Fax: +86 371 86099969
sales@composite-insulator.com Orient is a composite insulator manufacturer for products of composite insulator and polymer insulator
