Insulator Makes Life Better 
Current position: Orient > model >

Dry power-frequency flashover voltage test for insulator

Dry power-frequency flashover voltage test for insulator is very important, this article mainly talk about which tests shall be done?

Dry power-frequency flashover voltage test

Dry power-frequency flashover voltage test

Dry power-frequency flashover voltage tests include
1) Initial dry power-frequency flashover voltage test
2) Sudden load release test (30% of SML* -20 to -25°C)
3) Temperature-mechanical test (50% of SML* +50 to -35°C)
4) Water-immersion test (42 hr, boiling water, NaCl0.1% weight)
5) Verification tests
  a) Visual inspection (for cracking or other abnormality)
  b) Steep-front impulse voltage test
  c) Dry power-frequency voltage tests
    ◆ Flashover test (to check for drop from initial conditions)
    ◆ 80% of FOV for 30 min (to check for temperature rise in insulator shank)
* SML = specific mechanical load

The following test results were obtained:
a) Visual inspection: no cracking or separation of the housing rubber was observed.
b) Steep-front impulse voltage test: The insulators tested were separated into two sections and 1000 kV/ ms (positive- and negative-polarity) were applied 25 times to each. All underwent external flashover, but no puncture of the housing rubber or core occurred.
c) Dry power-frequency voltage tests: the results of five repetitions of average flashover voltage, but all of the test specimens held 90% or more of initial flashover voltage. Next 80% of average initial flashover voltage (328.9 kV x 0.8 = 263 kV) was applied to the lower end-fitting for 30 min and the temperature rise was measured immediately. All test specimens satisfied the standards, with a temperature rise of less than 20 K.

 

Relative Articles:
History of composite insulator
How to clean high voltage composite insulator?
Test for composite insulator
Composite silicone insulators; 10-1000kV composite silicone insulator

 

About Us - Composite insulator manufacturer
More than 30 years experience in power industry since 1978 as a composite insulator manufacturer in China, advanced manufacturing process, strict quality control test system, ISO certificated, excellent communication, considerate services, enable us to be a leading composite insulator manufacturer of composite insulator and polymer insulator.
Our Advantage
ISO 9001 certificate
5000h Aging Type Test Report
Considerate after-sale services
Patent Product and New Technique
Instant Response for Each Requirement

©2014 Zhengzhou Orient Power Co., Ltd All rights reserved. Tel/Fax: +86 371 86097078 
sales@composite-insulator.com  Orient is a composite insulator manufacturer for products of composite insulator and polymer insulator