• 

  HDPE insulator, HDPE pin type insulator
• 

  66kV silicone polymeric composite post insulator
• 

  Composite post insulator
• 

  High strength light weight fiberglass rod
• 

  Materials of the composite long rod insulator
• 

  Composite Insulator Core Rod

Maclean line post insulator used on the transmission line. Since the good performance of Maclean line post insulator it is also can used on pollution areas.

Maclean line post insulator is manufactured totally according to the ANSI C29.13 Standard, the technical of Maclean line post insulator is compliance with the standard.

In order to ensure the good quality of Maclean line post insulator all the raw material is advanced material. Maclean line post insulator are consisted by three main parts
Reinforce fiber glass
Silicone rubber housing and shed
Fitting on both end

For system voltage 220kV and above, recommend corona rings for one or both ends, also it’s available if some applications required corona rings for lower system voltage.

The Technical Parameter of Maclean line post insulator:
System Voltage: 11kV, 33kV, 66kV(69kV), 132kV, 230kV
Specified Cantilever Load (SCL): 1-20 kN
Color: Red, Gray,
Applicable Standard: IEC, ANSI, CAN, BS, AS, IS or Customer requirement

In order to meet different needs of customers, the Maclean line post insulator have various structures:
Vertical tie-top types
Vertical clamp-top types
Horizontal clamp top-cup base types
Horizontal clamp top gain base type

Compare with porcelain insulator, the composite polymer Maclean line post insulator have several features:
Light weight, small size, easy for transportation and installation
High mechanical strength
Super performance for anti-pollution
Low maintenance cost

Relative Articles:
Pole line hardware
Polymeric station post insulators
11kv disc insulators specification
Pole stay wire